Welcome to visit Hubei LongSheng Sihai New Materials Co., Ltd.
Product Center
SH-460 Integrated Bottom-Coat Cathodic Electrodeposition Coating
Integrated Bottom-Base Cathodic Electrodeposition Coating
category:
Waterborne electrophoretic coating
Product Description
SH-460 bottom and base integrated Cathodic electrophoretic coating
I. Product Overview
SH-460 Black, bottom and base integrated / Gray cathodic electrophoretic coating is… Hubei Longsheng Sihai New Materials Co., Ltd. Independently developed by the limited company New One Electrophoretic coating. It combines both aging resistance and salt-spray resistance. It is widely used in… Application scenarios for the bottom‑face‑unification requirement.
II. Original paint performance Indicator
| Project |
Technical indicators |
Inspection criteria |
||
| Emulsion |
Black Color paste |
Gray paste |
|
|
| Appearance |
Milky white liquid |
Black A viscous liquid, free of lumps. |
Gray, viscous liquid, free of lumps. |
Visual estimation |
| Solid content ( 120℃ ,1h ), % |
30 .0±2.0 |
45 .0±2.0 |
55 .0±2.0 |
GB/T6751 |
| Fineness , mu m |
---- |
15 |
15 |
|
| pH value ( 25℃ ) |
6.0 ±0. 2 |
4.8±0.2 |
4.8±0.2 |
pH meter |
| Electrical conductivity ( 25℃ ), μs/cm |
1000±300 |
---- |
---- |
HG/T3335 |
| Storage stability ( 5-35℃ ) |
No delamination; no significant differences compared with the state prior to storage. |
Visual estimation |
||
Note: When measuring pH and conductivity, follow Resin /Pure water = 1: 1 Dilution
III. Tank solution Parameter
| Category |
Project |
Control indicator |
|
| New plating solution |
Anolyte |
||
| Electrophoresis tank |
Proportioning |
1:4:5/1:5;6 |
-- |
| Ripening time , h |
48h |
-- |
|
| Solid content ( 120℃ ,1h ), % |
16±2 |
-- |
|
| pH value |
5.6-6.2 |
2.0-3.5 |
|
| Electrical conductivity , microseconds /cm |
15 00± 500 |
300-80 0 |
|
| Yan Jibi |
0.25-0.35 |
||
| Penetration Power (Four-Box Method) cm, ≥ |
55 |
||
| Solvent content , % |
1.2-2.5 |
||
| Liquid level difference , centimeter |
10-15 |
||
| MEQ value |
30±5 |
||
| Electrophoresis voltage , V |
0-300 |
||
| Breakdown voltage , V |
≥350 |
||
| Tank solution temperature , °C |
30±2 |
||
| Electrophoresis time , s |
60–180 |
||
| Drying oven |
Set furnace temperature , °C |
180–200 |
|
| Curing conditions |
Drying time ( 170±5℃) |
2 0 min (substrate holding time) |
|
Four 、 Product Coating Performance Specifications
| Project |
Indicator |
Inspection criteria |
|
| Appearance |
Smooth and even, free from defects such as pinholes and sink marks. |
Visual estimation |
|
| Hardness |
H, ≥ |
H |
GB/T6739 |
| Cupping |
mm, ≥ |
6 |
GB/T9753 |
| Adhesion |
level |
0 |
GB/T9286 |
| Flexibility |
mm |
1 |
GB/T1731 |
| Impact |
Kg.cm |
50 |
GB/T1732 |
| Luster |
600 |
≥50 |
GB/T9754 |
| Water resistance |
( 40℃ ), h, ≥ |
240 |
GB/T1733 |
| Acid resistance |
( 0.05N H2SO4) , h, ≥ |
48 |
GB/T9274 |
| Alkali resistance |
( 0.1N NaOH) , h, ≥ |
72 |
GB/T9274 |
| Thermal stability |
40℃ × 98%, 240 h |
The expansion is not obvious. No delamination occurs during the adhesion test. |
GB/T 1740 |
| Gasoline resistance |
70# or 90#, 24h |
No bubbling, no wrinkling Rust-proof , does not fall off |
GB/T 9274-1988 |
| Drying Performance Test |
≥20 times |
No abnormalities on the coating surface. |
GB/T6753.2 |
| Weather resistance ( UVA-340 Type) |
Light retention rate ≥ 85% , △ E ≤ 3.0 |
500 |
GB/T23987-2009 |
| * Salt spray resistance |
(Thickness greater than 15 um) ,h, ≥ |
500 |
GB/T1771 |
*Bonder standard phosphated steel sheet, unidirectional corrosion spread ≤ 2 mm 。
Five , storage, packaging, and transportation
- Storage: It is recommended to store this product in a well-ventilated area at low temperature ( 5 ℃-3 5 °C) storage, Avoid the sun Light Direct sunlight . Product shelf life After 6 months, if the product is retested beyond the expiration date and still meets the standards, it may continue to be used.
- Packaging: Standard packaging 20L Plastic bucket , also Packaging can be customized upon request. ;
- Transportation: This product is a water-based coating. , Non-flammable and non-explosive substances , Store and transport as non-hazardous materials. During transportation, protect from direct sunlight and avoid freezing (> 5℃) 。
Recommended Products
Online consultation